Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Hampton?
Spring replacement in Hampton typically costs $180 – $340 for a single spring. That range covers the spring, the labor, and the balance and safety check that follows. A matched pair of springs is usually replaced together because both springs take the same wear, so a pair runs about twice that range. The written estimate you get before any work begins sets the final price.
Your garage door is your home’s largest moving part, and the springs are what carry its weight. When one lets go, you’re not dealing with a cosmetic problem – the door becomes hard to lift, may slam down, or stops working entirely. We handle this as a core service, not a side job. Our technicians have up to 11 years of experience, and we’re certified to service the eight brands most Hampton homes already have: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Call (877) 600-5531 for a free estimate.
Key Takeaways
- One spring: $180 – $340 typical. A matched pair: about twice that range.
- Springs are replaced as a pair in most cases because they wear together.
- Torsion and extension spring work is hazardous. It’s a trained-technician job, not a homeowner task.
- We work on the brand you already have, so you’re not guessing your way through a repair.
- Estimates are free. Call (877) 600-5531.
Spring Replacement Cost Breakdown (2026)
Here’s how the typical pieces of a spring replacement break down for the Hampton market. These are estimated ranges – your written estimate is the number that counts.
| Item | Typical Estimated Range |
|---|---|
| Single torsion or extension spring, installed | $180 – $340 |
| Matched pair of springs, installed | About $360 – $680 |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a spring failure damaged a panel) | $250 – $500 |
| General garage door repair (broader fixes) | $150 – $600 |
Most spring jobs land in the single-spring or pair range. Where the estimate moves up is when the failure took other parts with it. A snapped spring can whip a cable, bend a track, or drop a heavy door onto a panel. When that happens you’re paying for a spring job plus a cable or panel line item, and the total can climb toward the higher end of general repair. Older doors with a single spring design sometimes need a conversion to a two-spring setup, which changes the parts cost. We build the estimate from what we actually find when we look at the door, not from a flat rate over the phone.
What Affects Spring Replacement Pricing in Hampton
- Torsion vs. extension springs. Torsion springs sit above the door on a shaft; extension springs run along the sides on a track. Torsion work involves more tension and more setup, so it usually sits at the higher end of the range. Extension spring jobs can land lower. We handle both.
- One spring or a pair. Springs are built to a cycle count, and two springs mounted together wear at nearly the same rate. Replacing just the one that broke means the other is close behind, so most jobs replace the pair. That’s the biggest single variable on the bill.
- Door weight and size. A wide, insulated double door carries more weight than a single-car door, and springs are matched to that load. Heavier doors need heavier springs, which cost more. Hampton’s mix of brick ranchers and newer two-car builds means we see both regularly.
- Additional damage found during the job. A spring failure is often loud and abrupt. Cables, rollers, and bottom brackets take the shock. When those parts are worn, they get quoted separately so you can see exactly what you’re paying for.
- Brand and hardware. We’re certified to service Clopay, Amarr, Wayne Dalton, Raynor, and the other major brands, so we match the replacement spring to your existing door rather than forcing a universal part. Matching the right spring extends the life of the new one. See our Hampton Garage Door Repair Co page for the full service lineup.
- Access and door condition. A door that’s been sticking or off-balance for a while can need a track adjustment before new springs go on. We quote that honestly as part of the work rather than after.
A Word on Safety
Torsion springs store a large amount of energy, and a spring under tension can cause serious injury if it’s handled wrong. That’s why we don’t hand homeowners a how-to for this one. We check the door, identify the failure, and do the work safely. If you’re hearing a bang from the garage, seeing a gap in a spring, or finding the door too heavy to lift, that’s a sign to call a trained technician, not to take it apart yourself. Spring repair done safely is the whole point.
How to Save on Spring Replacement
You can’t dodge the cost of a spring that’s failed, but a few habits keep the bill at the lower end of the range instead of the higher one.
- Replace the pair at once. It feels like spending more on the spot, but replacing one spring now and the twin three months from now means paying the service call and labor twice. A pair done together is the cheaper road.
- Listen for the early warning. A garage door that’s gotten heavier, noisier, or slower to lift is telling you the springs are losing tension. Catching it before the snap often keeps cables and tracks out of the repair.
- Keep the door balanced. If the door won’t stay put halfway up, the springs and the door aren’t matched anymore. A quick balance check is part of the estimate.
- Don’t skip the cable inspection. Cables and springs age together. Checking both at once avoids a second visit.
- Get the estimate in writing before work starts. We give free estimates so you know the number, and the line items, before anyone touches the door. Call (877) 600-5531.
For a deeper look at how spring jobs are handled and scheduled, see our guide to spring replacement.
FAQs – Spring Replacement Cost
How much does a garage door spring replacement cost in Hampton?
Most single-spring replacements in Hampton run $180 – $340. If both springs are replaced as a pair, expect roughly twice that range, about $360 – $680. Your free written estimate confirms the exact figure based on your door – call (877) 600-5531 for an exact quote.
Is it cheaper to repair or replace a garage door spring?
Repairing (replacing) the spring is almost always cheaper than replacing the door, and it’s the right call unless the door panels or frame have failed too. A spring job runs $180 – $340 for one spring; a full new door installation starts at $700. Springs alone are the far smaller spend – call (877) 600-5531 and we’ll tell you which you actually need.
Why does replacing two springs cost more than one?
Because a paired spring set is two parts and two installs. A pair typically runs about twice the single-spring range, roughly $360 – $680. We replace pairs together in most cases because matched springs wear at the same rate, so a single replacement usually just defers the second bill – call (877) 600-5531 for a pair quote.
Can you come today if my spring just broke?
In most cases, yes – same-day service is available, and emergency garage door service is part of what we offer when a broken door traps a car or leaves the house unsecured. There’s no after-hours or weekend pricing trap here; the estimate covers the work. Call (877) 600-5531 and we’ll book you in, and estimates are free.
Does spring replacement pricing in Hampton vary by brand?
A little. Springs are matched to the door, so the brand and weight of your Clopay, Amarr, Wayne Dalton, or Raynor door affects which spring fits. Because we’re certified to service these brands, we source the right part instead of a universal one. Quotes still land in the $180 – $340 range for a single spring – call (877) 600-5531 for yours.
What else might I need to replace with a broken spring?
It depends on the failure. Cables ($130 – $250), rollers ($110 – $220), or a panel ($250 – $500) sometimes take the damage when a spring lets go. We inspect the whole door and list any extra work separately so there are no surprises – call (877) 600-5531 to get the full picture.
Ready for an Estimate?
Whether your spring just snapped or you’ve been nursing a heavy, noisy door for months, the fastest way to know your number is to call. We offer free estimates, upfront pricing, and same-day service in most cases, and we’re the specialist you want on a part this safety-critical. Our technicians work on the brand you already have, so the repair fits your door. Call (877) 600-5531 today to schedule your free estimate.
Pricing reflects the Hampton market as of 2026. Hampton Garage Door Repair Co offers free estimates – call (877) 600-5531.
Written by the team at Hampton Garage Door Repair Co.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Colleen Barrett"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Matt Mercer"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tim Thompson